基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子     

周丰森  王迪晋  旦增 《大地测量与地球动力学》2019,39(10):1013-1016

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据，基于一定的判断准则，筛选出质量较高的448个垂向观测数据，采用频域AR方法对0S0模态的特征频率和品质因子进行估值，并以信噪比为权重进行加权平均，得到特征频率f=0.814 658 4±5.3×10-7，品质因子Q=5 586±12。该结果与已有研究成果相比精度更高，有助于约束现有地球介质密度和衰减模型，使其更接近真实地球。  相似文献   

Normal fault growth and linkage in the Gediz (Alaşehir) Graben,Western Turkey,revealed by transient river long‐profiles and slope‐break knickpoints          下载免费PDF全文

Emiko Kent  Sarah J. Boulton  Alexander C. Whittaker  Iain S. Stewart  M. Cihat Alçiçek 《地球表面变化过程与地形》2017,42(5):836-852

The Gediz (Ala?ehir) Graben is located in the highly tectonically active and seismogenic region of Western Turkey. The rivers upstream of the normal fault‐bounded graben each contain a non‐lithologic knickpoint, including those that drain through inferred fault segment boundaries. Knickpoint heights measured vertically from the fault scale with footwall relief and documented fault throw (vertical displacement). Consequently, we deduce these knickpoints were initiated by an increase in slip rate on the basin‐bounding fault, driven by linkage of the three main fault segments of the high‐angle graben bounding fault array. Fault interaction theory and ratios of channel steepness suggest that the slip rate enhancement factor on linkage was a factor of 3. We combine this information with geomorphic and structural constraints to estimate that linkage took place between 0.6 Ma and 1 Ma. Calculated pre‐ and post‐linkage throw rates are 0.6 and 2 mm/yr respectively. Maximum knickpoint retreat rates upstream of the faults range from 4.5 to 28 mm/yr, faster than for similar catchments upstream of normal faults in the Central Apennines and the Hatay Graben of Turkey, and implying a fluvial landscape response time of 1.6 to 2.7 Myr. We explore the relative controls of drainage area and precipitation on these retreat rates, and conclude that while climate variation and fault throw rate partially explain the variations seen, lithology remains a potentially important but poorly characterised variable. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献   

莱州湾西构造带断裂特征及其对油气成藏的控制   总被引：1，自引：0，他引：1  

王永利  武强  姚长华  王应斌  杨在发 《海洋地质译丛》2011,(1):28-32

受古近纪莱州湾凹陷大规模断陷、郯庐断裂右旋走滑和垦东凸起大规模隆升三方面因素共同作用,莱州湾西构造带断裂系统发育,根据断裂性质及发育规模将断裂划分为3组不同方向的断裂组合,对油气的运移、聚集及保存都产生重要影响。根据莱州湾地区油气成藏规律并结合渤海其他区域近年勘探成果综合分析,莱北1号断层、斜坡区东西向反向正断层和走滑末端雁行式断层三类大规模调节断层对于油气成藏影响作用较大,这三类断层所控制的圈闭也是莱州湾凹陷及围区下一步勘探获得突破的重点区域。  相似文献   

PDC钻头切削齿布齿设计的新思路          下载免费PDF全文

金永男  陈宗涛  由昌英  段隆臣 《探矿工程》2015,42(5):72-76

切削齿布齿设计是PDC钻头设计的关键。为提高PDC钻头的钻进效率,综合考虑PDC钻头切削齿的设计特点和切削先后顺序等因素,并且通过对PDC钻头单切削齿实验结果进行分析,提出了以冠部轮廓法线为基准的切削齿布齿设计方法。  相似文献   

基于MapGIS数字高程模型基岩面高程等值线图的制作     

张宏鑫 《测绘与空间地理信息》2015,(6):62-63

基岩面高程等值线图是建立三维地质模型所需的一项重要数据,也是三维地质调查工作的一项重要任务。制作基岩面高程等值线的主要数据源为钻孔和地形等高线。在制作过程中,首先对钻孔数据进行筛选和标准化处理,筛选出347个钻孔投影成Map GIS的点文件(.WT),为提高精度,使成图更符合实际情况,结合武汉市地形特征,提取地表基岩露头出露部分等高线(.WL)代表露头区基岩面高程。再利用Map GIS DTM分析数字高程模型对钻孔和等高线对应的点文件和线文件(.WT和.WL)剖分插值网格化,生成平面和立体的基岩面等值线图。通过对Map GIS提供的4种剖分插值结果进行对比分析,应用Kring泛克里格网格化模型绘制的基岩面高程等值线图更符合实际情况,同时也更快速、方便。需要注意的是,在使用Kring泛克里格网格化方法时,应对数据进行正态分布检验。  相似文献   

益阳市似大地水准面精化成果分析     

伍百发  郭春喜 《测绘信息与工程》2011,(5):46-48,51

利用重力场模型、数字高程模型、水准测量成果和GPS技术,采用重力法与移去恢复技术,分析和研究了益阳城区似大地水准面精化获取的技术和方法,并对获取的似大地水准面进行了精度评定。  相似文献   

海口ZK26井多层位水温对比观测   总被引：1，自引：1，他引：0  

张慧  解晓静  叶向顶  刘阳  明穗花  郭南 《地震地磁观测与研究》2011,32(1):85-90

在系统清理海口ZK26井3个不同层位(-153 m、-336 m、-510 m)近10年观测资料对比的基础上,对比单井多层位水温动态多年趋势、年、月、日动态类型,并对其不同动态类型的成因及影响因素进行分析.对比观测结果表明,海口ZK26井不同层位的水温表现出不同的正常动态特征,与观测层位的水文条件、水力性质有着密切的联...  相似文献   

An improved segmentation approach for planar surfaces from unstructured 3D point clouds     

Tarek M.  Awwad  Qing  Zhu  Zhiqiang  Du  Yeting  Zhang 《The Photogrammetric Record》2010,25(129):5-23

The extraction of object features from massive unstructured point clouds with different local densities, especially in the presence of random noisy points, is not a trivial task even if that feature is a planar surface. Segmentation is the most important step in the feature extraction process. In practice, most segmentation approaches use geometrical information to segment the 3D point cloud. The features generally include the position of each point (X, Y and Z), locally estimated surface normals and residuals of best fitting surfaces; however, these features could be affected by noisy points and in consequence directly affect the segmentation results. Therefore, massive unstructured and noisy point clouds also lead to bad segmentation (over-segmentation, under-segmentation or no segmentation). While the RANSAC (random sample consensus) algorithm is effective in the presence of noise and outliers, it has two significant disadvantages, namely, its efficiency and the fact that the plane detected by RANSAC may not necessarily belong to the same object surface; that is, spurious surfaces may appear, especially in the case of parallel-gradual planar surfaces such as stairs. The innovative idea proposed in this paper is a modification for the RANSAC algorithm called Seq-NV-RANSAC. This algorithm checks the normal vector (NV) between the existing point clouds and the hypothesised RANSAC plane, which is created by three random points, under an intuitive threshold value. After extracting the first plane, this process is repeated sequentially (Seq) and automatically, until no planar surfaces can be extracted from the remaining points under the existing threshold value. This prevents the extraction of spurious surfaces, brings an improvement in quality to the computed attributes and increases the degree of automation of surface extraction. Thus the best fit is achieved for the real existing surfaces.  相似文献   

油企业抗震防灾规划信息管理系统的设计          下载免费PDF全文

《地震地质》1999,21(3):285

基于石油企业抗震防灾工作对网络与数据库的信息管理系统的需求，对数据库产品进行了简要分析，并根据石油企业抗震防灾规划的需求和信息管理的一般模式，提出了石油企业抗震防灾规划信息计算机管理系统的设想。认为，以 Ｍｉｃｒｏｓｏｆｔ Ａｃｃｅｓｓ 数据库软件为基础，利用 Ｖ Ｂ或 Ｖ Ｃ等可视化前端应用开发工具，是目前比较好的方案，它将使石油企业抗震防灾规划工作在办公自动化方面迈向新的台阶  相似文献